Visit us on Facebook
 
Select Currency:    £  $  DKK
 
  Milliput: Superfine White - Epoxy Putty
Milliput: Superfine White - Epoxy Putty
 67,00 DKK

  
 

Superfine White Milliput is specially formulated for the restoration of porcelain and ceramics where a fine finish is desired. Milliput also allows for missing parts to be reconstituted.

Superfine White Milliput is recognised as one of the finest materials available for ceramic restoration.

Typical Applications:
  • Ceramic restoration
  • Picture frame restoration
  • Jewellery making
  • Modelling
  • Sculpting
  • Repair and filling UPVC
  • Swimming pool repairs
  • Chips, scratches and other imperfections in baths, showers, sinks, tiles and white kitchen appliances

    Milliput is the trade name for our epoxy putty. We produce five grades: Standard (Yellow/Grey), Terracotta, Silver Grey, Black and Superfine White. Each grade is presented in similar packs containing 2 x 56•7gm. sticks and the general instructions for preparation and usage are the same.

    Once equal quantities of each stick have been mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25 deg C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced.

    After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted.

    Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive. Milliput will set under water and is heat resistant up to 130°C.

    Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. the putty may now be applied and will set hard in three to four hours without shrinking.

  • Related Product Links:
    Milliput




          

    Visit us on Facebook
    Dunkeldorf Pictures!
    Read our #Tweets
    Explore Cabanaminis
    Click to see our Newest Products
    Learn more About King Games
    Read our Terms & Conditions
  • We Ship Our Orders World-Wide
  • VAT Free Shopping for non-EU Customers
  • Secure Checkout with Paypal or Credit Card